A New Titanium-Aluminum Carbide Particle Reinforced Zinc-Aluminum Matrix Composite Material

A New Titanium-Aluminum Carbide Particle Reinforced Zinc-Aluminum Matrix Composite Material

The particle reinforcement phase in the material is evenly distributed, the matrix and the reinforcement phase are closely combined, there are few defects, and it has good...
What are the vibration types of Bearings?

What are the vibration types of Bearings?

Bearings are important part of mechanical equipment. Its main function is to support the mechanical rotating body, reduce the friction coefficient during its movement, and...
Preparation of Micro-nano Iron Trioxide by Biological Template Method

Preparation of Micro-nano Iron Trioxide by Biological Template Method

Using FeCl3 as the starting material, using different biological templates (quantitative filter paper, inner egg membrane), through impregnation and calcination, successfu...

How to clean the bearings?

Tech107Days Ago (07-29)
If you find signs of failure of the bearings, sand and other impurities in the bearings, the lubricating oil starts to harden and deteriorate, or the bearings has been run...

Characteristics of Zirconium Diboride Ceramic Materials

Industry115Days Ago (07-21)
Zirconium boride is a common material in borides. There are three zirconium borides in the boron-zirconium system, namely zirconium monoboride (ZrB), zirconium diboride (Z...

How To Modify The Surface Of Nano Silica?

Industry122Days Ago (07-14)
Nano silica has small particle size, large specific surface area, excellent biocompatibility, and has the advantages of surface interface effect, little size effect, quant...

The development of a new generation of silicon nanoparticles | TRUNNANO

Innovations129Days Ago (07-07)
As a new material, nano-silicon has been discovered by the market for its unique and excellent properties such as non-toxic, harmless, and odorless, and has broad applicat...

What are the lubrication methods of sliding bearings

Tech171Days Ago (05-26)
When it is found that the lubricating oil of the bearing is insufficient, it is the most primitive method to supply fuel with a lubricator in a timely manner. This method ...

Eleven ways of bearing lubrication, how many do you know?

Tech171Days Ago (05-26)
The lubrication of the bearing is to enable the bearing to run normally, avoid direct contact between the raceway and the surface of the rolling element, reduce friction a...

How to lubricate bearings

Tech171Days Ago (05-26)
There are several ways of bearing lubrication: 1. Comes with, the newly installed bearings are greased around the guide rails and rolling elements, such as fans for house...

Analysis and countermeasures of bearing damage

Tech171Days Ago (05-26)
The bearing cannot be directly observed during operation, but the abnormality of the bearing can be detected through conditions such as noise, vibration, temperature, and ...

There are two common faults of bearings, do not ignore

Tech171Days Ago (05-26)
There are two types of faults in rolling bearings; one is that the bearing installation site's temperature is too high, and the other is noise during the bearing's operati...

Characteristics and clinical application of nickel-titanium alloy wire

News189Days Ago (05-08)
The characteristics of nickel-titanium alloy wire and its clinical application in the field of orthodontics. Nickel-titanium alloy is widely used for its superior superela...

What raw materials are needed to make foam concrete?

Industry218Days Ago (04-09)
The raw materials required for the preparation of foam concrete mainly include cement, water, and foaming agent. In addition, a certain amount of fillers and additives can...

India's Existing Coal-Fired Power Generation Project Has A Total Installed Capacity Of 62,200 MW

News235Days Ago (03-23)
It is reported that the total installed capacity of coal-fired power plants in India at various stages of construction is 6,200 MW....